| Rated voltage | Max discharge current | Max charging current | Self-discharge (25°C) | Recommended Using Temperature |
| 12V | 30l10(3min) | ≤0.25C10 | ≤3%/month | 15C25"C |
| Using temperature | Charging Voltage (25°C) | Charging Mode (25°C) | Cycle life | Capacity Affected by Temperature |
| Discharge: -45°C~50°C Charge: -20°C~45°C Storage: -30°C~40°C | floating charge: 13.5V-13.8V equalizing charge: 14.4V-14.7V | Float Charge: 2.275±0.025V/Cell Temperature parameters: ±3mV/celll°C cycle Charge: 2.45±0.05V/Cell Temperature Compensation Coefficient ±5mv/Cell°C | 100%DOD 572 times 50%DOD 1422 times 30%DOD 2218 times | 105%40℃ 90%@o·c 70%@-20℃ |
For more details, please feel free to contact us:
Attn: Mr Frank Liang Mob./WhatsApp/Wechat:+86-13937319271 Mail: [email protected]
A gelled battery, also known as a gel battery, is a type of valve-regulated lead-acid (VRLA) battery. It is designed to be maintenance-free and provides longer service life than a traditional flooded lead-acid battery. It consists of various components, each with unique functions. Below are the components of a gelled battery and their functions.
1. Lead-acid battery: The lead-acid battery is the primary component of a gelled battery. It provides the power storage and energy discharged during use.
2. Separator: The separator between the electrodes prevents the positive and negative plates from touch, reducing the occurrence of short circuits.
3. Electrodes: The electrodes consist of lead dioxide (positive electrode) and sponge lead (negative electrode). These electrodes are responsible for the exchange of ions between the electrolyte and the electrodes.
4. Electrolyte: The electrolyte contains a gel-like substance made of sulfuric acid and silica or other gelling agents which immobilize the electrolyte so that it does not spill if the battery is ruptured.
5. Container: The container houses all the components of the battery and the gel electrolyte. It is made of a durable material that is resistant to corrosion, leaking or cracking.
6. Vent: The vent is present on the cover of the container to allow gases generated during the charging process to escape the battery. It also prevents the buildup of pressure that can damage the cover or container.
Attn: Mr Frank Liang Mob./WhatsApp/Wechat:+86-13937319271 Mail: [email protected]
| COMPONENT | Positiveplate | Negativeplate | Container | Cover | safetyvalve | Terminal | Separator | Electrolyte |
| RAWMATERIAL | Leaddioxide | Lead | ABS | ABS | Rubber | Copper | Fiberglass | Sulfuricacid |
If you want to join the market of the 12V250AH solar gel battery, please contact us!
* Telecommunications * Solar system * Wind power system * Engine starting * Wheelchair * Floor cleaning machines * Golf trolley * Boats
